Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the engine control unit in the Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Control unit

Video tutorial

In this video, you can see where the control unit is located in the Peugeot 206 and how to proceed if you need to replace it. As shown, it is positioned in the engine bay, specifically behind the right headlamp. To remove the control unit, simply unscrew the fixing bolts with a socket spanner, disconnect the large connector by unlocking the clip, and remove the nut from the metal cover.

Once the cover is open, you can unscrew the final screws and proceed with replacing the board. To reassemble everything, simply follow the reverse procedure.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Diagnose the Alarm Fault on a Peugeot 206
How to Diagnose the Alarm Fault on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) A common issue on the Peugeot 206 is the alarm system indicating a fault when starting the vehicle; you might think it’s a key recognition failure, b…
How to Manually Open and Close the Roof of the Peugeot 206 CC
How to Manually Open and Close the Roof of the Peugeot 206 CC
Peugeot 206 (1998-2012 / MK 1) This brief and simple guide provides instructions for manually opening and closing the roof of the Peugeot 206 CC; if the electronic mechanism is not…
How to Program the Remote for the Peugeot 206
How to Program the Remote for the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Here are the main instructions for programming the key remote of the Peugeot 206. First, get in the vehicle and press and hold the clutch pedal; then…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos