Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Rear Bumper on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Rear bumper

Let’s explore the main steps to remove and replace the rear bumper on the Peugeot 206. First, open the car's bonnet and start unscrewing all the fastening screws located at the top and bottom of the bumper; unscrew the additional screws located on both sides of the rear wheel arches, gently releasing the bumper from the sides until it is completely removed, as shown in the video. At this point, carry out the repair or replacement of the rear bumper, securing it properly to the bodywork with all the screws.

Posted on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on 206
Removing the Rear Bumper on 206
Peugeot 206 (1998-2012 / MK 1) Removing the rear bumper of the Peugeot 206? Remove the bumper to replace it if damaged. Open the rear hatch to access the boot area. Undo the securi…
Removing the Grille from a Peugeot 206
Removing the Grille from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the grille from a Peugeot 206? Let's see how to detach it from above the front bumper. Undo the securing screws located above the grill…
Replacing the External Wing Mirror on the Peugeot 206
Replacing the External Wing Mirror on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, follow these main instructions to remove and replace the external wing mirror on the Peugeot 206. First, open the front door of the vehicle an…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos