Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper on the Peugeot 206cc?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper on the Peugeot 206cc, an extremely simple and quick operation. First of all, we open the trunk door, then we locate the bolts along the top edge of the bumper and unscrew them using a Torx key. We then move in front of one of the two wheel arches, unscrew the additional bolts indicated with a 10mm socket wrench and repeat the operation on the opposite side. At this point, all that remains is to remove the last lower screws, separate the bumper from the frame and disconnect the connector of the fog light.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Open the Roof of a Peugeot 206cc
How to Manually Open the Roof of a Peugeot 206cc
Peugeot 206 (1998-2012 / MK 1) In this video tutorial, you will learn how to manually open the roof of a Peugeot 206cc. First, open the boot lid and unscrew its screws with an Alle…
How do you reset the window regulator of the Peugeot 206CC?
How do you reset the window regulator of the Peugeot 206CC?
Peugeot 206 (1998-2012 / MK 1) To reset the power windows of the Peugeot 206CC, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
Removing the Rear Bumper on 206
Removing the Rear Bumper on 206
Peugeot 206 (1998-2012 / MK 1) Removing the rear bumper of the Peugeot 206? Remove the bumper to replace it if damaged. Open the rear hatch to access the boot area. Undo the securi…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos