Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the brake pads of the Peugeot Speedfight 2, the same procedure will need to be carried out for both the front wheel and the rear wheel: you will need to loosen the nut that locks the central support pin of the wheel and that locks it at the end of the fork and swingarm. At this point, it will be possible to remove the wheels and proceed by loosening the screws that fix the brake calipers to the appropriate discs: you can now remove the pads from inside the calipers and insert the new ones. After installation, you will need to reattach the wheels and verify that everything is functioning properly.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on the Peugeot Speedfight 2
How to Replace the Brake Pads on the Peugeot Speedfight 2
Speedfight 2 In today's tutorial video, see how to remove and replace the front and rear brake pads on the second series Peugeot Speedfight scooter. First, start …
How do you replace the exhaust pipe of the Peugeot Speedfight?
How do you replace the exhaust pipe of the Peugeot Speedfight?
Speedfight 2 In order to replace the exhaust of the Peugeot Speedfight 2, you need to loosen the screws that fix it to the appropriate supports on the right side …
How do you replace the transmission of the Peugeot Speedfight 2?
Speedfight 2 In order to replace the transmission of the Peugeot Speedfight 2, you need to loosen the screws that secure the transmission casing, located near the…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos