Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part: Brake pads

Video tutorial

In today's tutorial video, see how to remove and replace the front and rear brake pads on the second series Peugeot Speedfight scooter. First, start with the front brake pads; remove the front wheel and unscrew the fixing screws of the brake caliper to detach it from the disc, as shown in the video.

Now, take out the old brake pads and replace them with new ones, cleaning the caliper before reassembly; follow the video to the end for replacing the rear brake pads!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How do you replace the brake pads of the Peugeot Speedfight 2?
How do you replace the brake pads of the Peugeot Speedfight 2?
Speedfight 2 In order to replace the brake pads of the Peugeot Speedfight 2, the same procedure will need to be carried out for both the front wheel and the rear …
How to Replace the Speedometer Cable on a Peugeot Speedfight 2?
How to Replace the Speedometer Cable on a Peugeot Speedfight 2?
Speedfight 2 You can replace the speedometer cable on a Peugeot Speedfight 2 by loosening the screws that secure the front panel of the scooter: these screws are …
How to replace the exhaust on a Peugeot Speedfight?
How to replace the exhaust on a Peugeot Speedfight?
Speedfight 2 To replace the exhaust on a Peugeot Speedfight 2, loosen the screws that secure it to the appropriate supports on the right side of the scooter near …

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos