Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump of the Peugeot Citystar 125?

Model: Peugeot Citystar 125
Part: Fuel pump

Video tutorial

In order to replace the fuel pump of the Peugeot Citystar 125, you need to loosen the screws that fix the covering of the footrest compartment and those that fix the covering in the front part of the underseat compartment: once the fixing screws of these panels have been removed, it will be possible to proceed by locating the pump here.

The pump will need to be removed from its seat by loosening the screws that fix it and pulling it out of its housing after disconnecting the connectors; at this point, it will be possible to proceed by inserting the new pump and checking that everything works correctly.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Peugeot Citystar 125?
How to Replace the Fuel Pump on a Peugeot Citystar 125?
Citystar 125 To replace the fuel pump on a Peugeot Citystar 125, remove the protective panel located in the footwell of the bike and the one at the base of the se…
How do you replace the engine oil of the Peugeot Citystar 125?
How do you replace the engine oil of the Peugeot Citystar 125?
Citystar 125 In order to replace the engine oil of the Peugeot Citystar 125, you need to loosen the drain plug in the central lower part of the motorcycle: once t…
How to Adjust the Headlights of the Peugeot Citystar 125?
How to Adjust the Headlights of the Peugeot Citystar 125?
Citystar 125 To adjust the front headlights of the Peugeot Citystar 125, loosen the Torx screw (T25) that secures the plastic cover featuring the manufacturer's l…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos