Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Peugeot Metropolis 400?

Model: Peugeot Metropolis 400
Part: Brake pads

This video is currently unavailable

It will be possible to replace the front brake pads of the Peugeot Metropolis 400 by loosening the screws that fix the brake caliper corresponding to the disc: when the caliper fixing screws have been loosened, it will be possible to detach it from the disc and remove the pin that locks the pads inside the caliper.

Once the pin is removed, it will be possible to remove the pads in order to insert the new ones: these can now be properly fixed in order to lock the caliper on the disc and verify that everything works correctly.


Posted on 13 August 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel on the Peugeot Metropolis 400?
How to Replace the Rear Wheel on the Peugeot Metropolis 400?
Metropolis 400 To replace the rear wheel on the Peugeot Metropolis 400, you need to loosen the nut that secures the central axle of the wheel located at the rear sw…
How to Top Up the Coolant on a Peugeot Metropolis 400
How to Top Up the Coolant on a Peugeot Metropolis 400
Metropolis 400 The instructions in this guide will show you how to top up the engine coolant on the Peugeot Metropolis 400 scooter in simple steps. First, place the…
How to replace the transmission on the Peugeot Metropolis 400?
How to replace the transmission on the Peugeot Metropolis 400?
Metropolis 400 To replace the transmission on the Peugeot Metropolis 400, you need to loosen the screws that secure the cover on the left side of the scooter, allow…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos