Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If you want to manually reset the service light on the central panel of your Peugeot Django, just read the following guide and follow the procedure described below. First of all, start the operation with the panel turned off and hold down the central button. At the same time, insert the key and turn on the panel, then release the central button. At this point, hold down the same button again for a few seconds and wait for the service light reset to complete. Finally, turn off the panel or drive to finish the procedure.

Posted on 26 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Peugeot Django?
How to Reset the Service Light on the Peugeot Django?
Django To reset the Service light on the Peugeot Django, press and hold the button located at the bottom centre of the instrument panel while it is off. Whi…
How do you replace the exhaust pipe of the Peugeot Django?
How do you replace the exhaust pipe of the Peugeot Django?
Django In order to replace the exhaust pipe of the Peugeot Django, you need to start by loosening the screws that hold it to its housing, which is located n…
How to Replace the Seat on a Peugeot Django?
How to Replace the Seat on a Peugeot Django?
Django To replace the seat on a Peugeot Django, open the under-seat compartment so that the seat can be fully lifted. Once the seat is lifted, you can unscr…

How do you replace the headlight bulb of the Sym Citycom 300?

In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle fairing: once the fastening screws of these panels have been loosened, you can unscrew those on the inside of the front fairing, so that the latter can be removed from its seat. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting its connector and removing the bulb inside; in this way you can reinstall the removed panels.

Watch the video!


by ScegliAuto

More videos