Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Smartphone Holder on Peugeot Speedfight 4

Model: Peugeot Speedfight 4
Part: Onboard computer

Video tutorial

In this video, you can see how easy and visually appealing it is to install a smartphone holder on the Peugeot Speedfight 4. You can find the part, for example, on Amazon with the code B00KY3W1D2 for £45.00 + £4.99 delivery. The installation is very simple.

Open the compartment under the instrument cluster and position the USB socket, which will come out of one of the two dedicated holes. Then, place the phone holder into its socket, connect it to its wire, and finally adjust it according to your preferences before placing your smartphone on it.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

How to Remove the Exhaust from the Peugeot Speedfight 4
How to Remove the Exhaust from the Peugeot Speedfight 4
Speedfight 4 Today, follow this brief and simple guide for instructions on how to remove and replace the exhaust of the Peugeot Speedfight 4 scooter. First, place…
Removing the Variator from the Peugeot Speedfight 4
Removing the Variator from the Peugeot Speedfight 4
Speedfight 4 In this brief and simple guide, you will find instructions to remove and replace the variator on the Peugeot Speedfight 4 scooter. First, place your …
How to Remove and Replace the Thermostat on the Peugeot Speedfight 4
How to Remove and Replace the Thermostat on the Peugeot Speedfight 4
Speedfight 4 Today's guide will show you the steps to remove and replace the thermostat and coolant on the Peugeot Speedfight 4 scooter. First, place the scooter …

How to Replace the Engine Oil and Oil Filter of an Aprilia Tuono V4

In this guide, we will see the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Aprilia Tuono V4 motorcycle. First, place the bike on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screwing by hand and tightening gently), as shown in the video. At this point, top up with new engine oil, bringing the level to the maximum mark.

Watch the video!


by ScegliAuto

More videos