Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on Peugeot Citystar 125

Model: Peugeot Citystar 125
Part: Oil filter

Video tutorial

Using an 8mm socket wrench, loosen the two bolts securing the oil filter cover, then continue by hand as these screws are quite long. Once fully undone and removed, take off the round cover.

At this point, the oil filter should come out easily; if not, apply some force, but you should be able to extract it by hand despite the old oil residue around it. While you're at it, clean the filter housing and the area around it as best as you can. Insert the new filter and screw the cover back on.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Peugeot Citystar 125
Engine Oil Change on Peugeot Citystar 125
Citystar 125 In this video tutorial, you will see how to change the engine oil on a Peugeot Citystar 125. First, position your scooter upright on its stand: then,…
How to Replace the Transmission on a Peugeot Citystar 125?
How to Replace the Transmission on a Peugeot Citystar 125?
Citystar 125 You can replace the transmission on a Peugeot Citystar 125 by loosening the screws that secure the corresponding cover located near the rear wheel on…
How to Change the Engine Air Filter on a Peugeot Citystar 125 Scooter
How to Change the Engine Air Filter on a Peugeot Citystar 125 Scooter
Citystar 125 How to change the engine air filter on a Peugeot Citystar 125 scooter? Follow this guide to replace the filter. Position the scooter on the central s…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos