Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Peugeot Tweet 125 Scooter

Model: Peugeot Tweet 125
Part: Engine oil

Video tutorial

This guide shows how to change the engine oil on a Peugeot Tweet 125 scooter. The first step is to secure the vehicle on its stand.

To aid the drainage of the lubricant, you can unscrew the upper cap of the oil tank. On the right side, behind the exhaust pipe, there is the drain plug for the sump; use an Allen key to unscrew it and let the oil drain into a container.

Once the tank is empty, clean the filter attached to the plug and close the drain valve. Using the oil specified in the owner's manual, fill the tank through the upper cap to the recommended volume; start the engine for a few minutes to circulate the oil. After turning off the engine, check the oil level and top up after a few minutes of shutdown.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fork Oil on the Peugeot Tweet 125
How to Replace the Fork Oil on the Peugeot Tweet 125
Tweet 125 This guide shows you how to disassemble the front fork and replace the oil on the Peugeot Tweet 125 scooter. First, place the scooter on its centre s…
How to replace the engine oil in the Peugeot Tweet 125 scooter?
How to replace the engine oil in the Peugeot Tweet 125 scooter?
Tweet 125 In this tutorial we can see how to replace the engine oil in the Peugeot Tweet 125 scooter, an extremely simple and fast operation. First of all, we …
How to Replace the Carburettor on Peugeot Tweet 125
How to Replace the Carburettor on Peugeot Tweet 125
Tweet 125 In this guide, you will find the instructions that will allow you to remove and replace the carburettor of the Peugeot Tweet 125 scooter. First, plac…

How to Replace the Chain and Sprocket on a Gilera Smt 50

Today, we will discover the main steps to remove and replace the drive chain and sprocket on the Gilera Smt 50. First, place the motorcycle on a stand and begin by removing the rear wheel, disconnecting the drive chain and unscrewing the central axle of the wheel; then unscrew the screws of the sprocket fixed to the rim to remove it and replace it with the new one (having the same tooth count), as shown in the video. At this point, install the new drive chain and the wheel, finally adjusting the chain as per the instructions.

Watch the video!


by ScegliAuto

More videos