Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Windscreen on the Peugeot Kisbee?

Model: Peugeot Kisbee
Part: Windshield

Video tutorial

To install the windscreen on the Peugeot Kisbee, you need to remove the mirrors by loosening the bolts located at the top. Insert the supports that will hold the windscreen in place, threading them through the specially positioned holes below the grips.

At this point, reinsert the mirrors, connecting them to the windscreen support structure for added stability.

After inserting the rubber grommets, you can rest the windscreen on the support and secure it by inserting the rivets above the glass, inside the rubber grommet.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…
How to install the rear top box on the Peugeot Kisbee?
How to install the rear top box on the Peugeot Kisbee?
Kisbee To install the rear top box on the Peugeot Kisbee, first lift the seat to access the previously covered under-seat compartment: at the rear, you will…
Removing the Speed Limiter on Peugeot Kisbee
Removing the Speed Limiter on Peugeot Kisbee
Kisbee In today's video, you will learn how to remove the speed limiter on a Peugeot Kisbee 50cc scooter by making these simple modifications. First, open a…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos