Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : Peugeot Kisbee speed limiter removal

Model: Peugeot Kisbee
Peugeot Kisbee speed limiter removal

In today's video we will see how to remove the speed limiter on a Peugeot Kisbee 50cc scooter, by making these simple changes. First we open and lift the saddle and we go to remove the plastic bulkhead, as well as the glove compartment, by unscrewing the fixing screws with a socket wrench. Then we access the electronic board and the wiring that we find on the side; then let's disconnect the electrical connector and make the change that is illustrated in the video. Then reassemble everything and verify the correct success of the operation!


Posted on 4 March 2024 by ScegliAuto



How to install the speed limiter on the Peugeot Kisbee?
Kisbee In order to mount the speed limiter on the Peugeot Kisbee it is necessary to lift the saddle pad and loosen the bolts that secure the protective cove
How do you replace the transmission of a Peugeot Kisbee?
Kisbee To replace the transmission of the Peugeot Kisbee, you need to loosen all the bolts that fix the transmission casing located near the rear wheel of t
How do you replace the exhaust pipe of the Peugeot Kisbee?
Kisbee In order to replace the exhaust pipe of the Peugeot Kisbee, you need to loosen the screws that secure the exhaust terminal to its housing, located ne

How to replace the Piaggio Beverly 500 water pump

This guide illustrates the procedure for repairing or replacing the water pump for the Piaggio Beverly 500. For this procedure, the following steps must be carried out: 1. Disassemble the muffler; 2. Remove the air filter; 3. Disassemble the oil pan and before doing this, first drain all the oil inside, making sure during disassembly that there are no gaskets residues; 4. Remove the casing, again with the same reasoning, check for the presence of any residual gaskets and replace them if necessary. During disassembly, if you also need to replace the gaskets, get new spare parts, in this case it is advisable to replace the oil seals as well for safety reasons. Last but not least, the shaft, if it too shows evident signs of wear, it is strongly recommended to replace this last component as well.

Watch the video!


by ScegliAuto

More videos