Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Elystar 125
In this video tutorial, follow the main instructions to remove and replace the clutch bell of the Peugeot Elystar 125 scooter. First, place the scooter on its centre stand and start by unscrewing the screws of the clutch cover located on the sides; then, unscrew the nut of the fan and subsequently the nut of the clutch bell, as shown in the video. Now you can replace, if necessary, the clutch, the belt, or the variator; finally, reassemble everything by applying the reverse procedure of disassembly!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Clutch Bell on a Peugeot Elystar 50
How to Remove the Clutch Bell on a Peugeot Elystar 50
Elystar 50 Today, see the steps that will allow you to remove and replace the clutch bell on a Peugeot Elystar 50 scooter. First, place the scooter on its centr…
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
Elystar 50 In this video tutorial, you will learn how to disassemble and replace the rollers in the variator of the Peugeot Elystar 50 scooter in simple and qui…
How to install the belt and variator of the Peugeot Elystar 50
How to install the belt and variator of the Peugeot Elystar 50
Elystar 50 In this guide, you will learn how to service the belt and variator of the Peugeot Elystar 50 scooter. First, place your scooter on the centre stand a…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos