Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the window lifter of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

In order to replace the window regulator of the Peugeot 206, you need to loosen the screws that fix the door panel to its housing: these screws are located near the window regulator switch and at the bottom of the panel. Once the panel is freed from its seat, you can access the underlying components in order to loosen the screws that fix the mechanism; then you can disconnect the connectors and remove the entire mechanism, so that you can insert the new one by fixing and connecting it properly.

Posted on 17 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Door Panel on a Peugeot 206
Replacing the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the sc…
How to clean the window switch on the Peugeot 206
How to clean the window switch on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, we see how to clean the window switches on the Peugeot 206: with a small screwdriver, remove the block, which accumulates a lot of dus…
Changing Oil on Peugeot 206 1.1
Changing Oil on Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Learn how to replace the engine oil on a Peugeot 206. Lift the bonnet to remove the oil filter. Raise the vehicle on a column lift or jack, unscrew t…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos