Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Door Panel on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the screws located in the handle space. Remove the window winder handle with a lever. Unscrew the remaining screws on the door panel and detach the securing clips. Remove the panel by hand and disconnect it from the door (unplug the power wiring and the opening cable). Fit the new panel, tighten all the screws, and reattach the window winder handle.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) .. Replacing the door panel on a Peugeot 206? Here’s how to remove the panel from the vehicle. Use a screwdriver t.. …
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Peugeot 206 (1998-2012 / MK 1) Do you want to remove the cover panel on a Peugeot 206? Here’s how to take off the cover panel and the lock. Before starting the disassembly, disconn…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos