Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Door Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

Replace the door panel if it is not repairable on a Peugeot 206. Remove the driver's left panel. Take off the frame of the door opening lever and detach the cover at the corner of the window. Using a screwdriver, unscrew the screws on the door panel and detach the retaining clips. Finally, pull off the panel by hand and detach it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door or replace the panel if damaged. Fit the new door panel with all the covering plastics.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Disassembly of the front door panel of the Peugeot 206
Disassembly of the front door panel of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Peugeot 206. First of all, we open the fr…
Guide to Dismantling the Door Panel of the Peugeot 206
Guide to Dismantling the Door Panel of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this brief and simple guide, discover how to dismantle the front door panel, as well as the rear one, of the Peugeot 206. First, open the front do…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos