Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the BSI on the 2016 Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Checks and maintenance

When refilling the windshield wiper fluid tank on a Peugeot 308, we must then reset the BSI. To perform this reset and allow the water, detergent, and antifreeze to flow out of the tubes, we must press the button to activate this function three times in a row. Once this operation is completed, the water will flow out without any issues. If not, check that the tubes are not clogged with dust, limescale, or other dirt that may have accumulated over time.

Posted on 3 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Peugeot 308 2021
How to reset the maintenance light on the Peugeot 308 2021
Peugeot 308 (2021-2026 / P5, MK 3) In this new mini guide, we will help you complete the procedure correctly to manually reset the maintenance light on the display of the instrument pa…
How to Reset the AdBlue Warning Light on the Peugeot 308
How to Reset the AdBlue Warning Light on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides the main instructions to reset the AdBlue warning light on the Peugeot 308. Before resetting the light, ensure you have topped up…
How to Reset the "Service" Light on a Peugeot 308
How to Reset the "Service" Light on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…

    Frequently Asked Questions

    • 308 2013-2021 - Why is the Peugeot 308 not connecting to Bluetooth? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos