|
Do it yourself
| |||
| ||||
How to Replace the Front Headlamp Bulb on a Peugeot 3008?
Model: Peugeot 3008
MK 2, P84
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
To replace the front headlamp bulb on a Peugeot 3008, the first thing to do is open the bonnet and locate the rear of the headlamp that contains the bulb to be replaced. In this model, space is a bit limited, so you may need to remove some surrounding components for better access, such as a plastic cover or shield. Once access to the headlamp is obtained, locate the electrical connector that powers the bulb and disconnect it gently. Next, unscrew or unclip the support that holds the bulb in place inside the headlamp. After removing the support, you can extract the old bulb. It is important to handle the new bulb without touching the glass, as the grease from your fingers can compromise its lifespan. After inserting the new bulb, reposition the support and reconnect the electrical connector. Ensure that you correctly reassemble each component that was previously removed. Once finished, test the headlights to verify that everything works correctly before closing the bonnet.
Updated on 31 October 2026 by ScegliAuto
Related tutorials
Peugeot 3008
(2016-2023 /
MK 2, P84)
The steps to follow to replace the front headlight bulb of the Peugeot 3008 are: - open the front hood; - remove the cap from the headlight dome; - d…
Peugeot 3008
(2009-2016 /
T84, MK 1)
This guide explains how to replace the bulb in the front headlamp on Peugeot 3008 vehicles. To perform the bulb replacement, remove the cover from th…
Peugeot 3008
(2016-2023 /
MK 2, P84)
Discover in this short and simple guide how to remove and replace the halogen bulb of the front headlight of the Peugeot 3008. First, open the bonnet…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |