Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Peugeot Partner

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Checks and maintenance

In today's tutorial, we can see how to reset the service light on a Peugeot Partner, first-generation model produced from 1996 to 2013. Let's see how to proceed. First, we need to press and hold the right button on the speedometer and then turn on the car's instrument panel without starting the engine. After doing this, we will see a countdown of ten seconds on the display, so we continue to hold down the speedometer button until the countdown is complete, as shown in the video, to reset the service light.

Posted on 27 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
Resetting the service indicator light of the Peugeot Partner Tepee.
Resetting the service indicator light of the Peugeot Partner Tepee.
Peugeot Partner Tepee (2018-2026 / MK 3) In this guide we will see the information that will allow us to reset the service light of the regular maintenance of the oil change of the Peugeot P…
How to restore the service light of the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) The manual procedure for resetting the service light of your Peugeot Partner only takes a few seconds to complete and all you have to do is follow th…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos