Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

Video tutorial

Replacing the rear headlight bulb of a Peugeot 206 car is a simple and quick operation to perform independently. To replace the bulb, we need to purchase an H7 bulb.

We open the trunk of the vehicle and remove the plastic clip that closes the side carpet, after removing the clip we move the carpet to access the headlight compartment. We unscrew the tightening screw by turning it counterclockwise, this operation can be done without the use of any tools, immediately after we disconnect the headlight connector and remove the headlight from its housing.

Using a wrench, we unscrew the nut on the dome light and open the headlight. We replace the burnt out bulbs and close the dome light, screwing the nut. We mount the headlight in its housing and tighten the screw clockwise; We connect the connector and install the carpet, securing it with the clip.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 206
How to Replace the Rear Light Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, replace the rear light bulb on a 2001 Peugeot 206. Open the boot and remove the side cover to access the light unit and connector. Unscrew the…
How to Replace the Rear Headlamp Bulb on a Peugeot 206 SW
How to Replace the Rear Headlamp Bulb on a Peugeot 206 SW
Peugeot 206 (1998-2012 / MK 1) In this guide for all Peugeot 206 Station Wagon owners, discover how to replace the rear headlamp bulb independently. First, ensure the car is parked…
Replacement of the rear fog light of the Peugeot 206
Replacement of the rear fog light of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light bulb of the Peugeot 206. First of all, let's…

Other guides you may be interested in

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos