Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the screen of a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Onboard computer

Let's see how to replace the display of a Peugeot 3008 car. Get into the vehicle and using a screwdriver with a flat tip, pry outwards first on the edges around the plastic panel that encloses the air vents and then use the same procedure on the bottom where the display you need to replace is located. Again, use the tip of the screwdriver to pry on both edges of the display and then proceed to extract it by gently pulling towards you. Remove the electrical connector. Finally, connect the new display to the connector and insert it into the appropriate slot, making sure to also secure the upper panel that was previously loosened.

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2016-2023 / MK 2, P84) To reset the infotainment system of the Peugeot 3008, you will need to turn on the instrument panel by inserting the ignition key into the ignition s…
Peugeot 3008 (2016-2023 / MK 2, P84) In this video, we see how to restart the multimedia screen on a Peugeot 3008 and 5008: the procedure is very simple and does not delete any settings …
Peugeot 3008 (2016-2023 / MK 2, P84) To prevent the vehicle's battery from draining more quickly while using the radio with the engine off on the 2020 Peugeot 3008 vehicles, it is possib…

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos