Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Headlight bulb

In the following article, we will see how to replace the low beam bulb of the Peugeot 308 2nd series. In addition to the bulb, we will need a flathead screwdriver for this operation. First, you need to lift the hood and secure it with the appropriate rod, then disconnect the connector by pressing with the screwdriver on the tab and pulling it outward. Once the connector is removed, you need to remove the cover, then remove the connector, after removing the connector, you need to remove the bulb fixing pin by pushing and pushing it to the right at the same time, at this point it will be possible to remove the bulb to replace it.

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Peugeot 308?
How do you replace the headlight bulb of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In order to replace the headlight bulb on the Peugeot 308, you need to open the hood to locate the inner cover panel of the headlight. This panel can…
How to replace the headlight bulb on the Peugeot 308
How to replace the headlight bulb on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Here are the steps to remove and replace the headlight bulb on the Peugeot 308, following the instructions below. First, open the vehicle's bonnet an…
How to Replace the Front Headlamp Bulb on a Peugeot 308
How to Replace the Front Headlamp Bulb on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Before you start, open the bonnet of your Peugeot 308. First, disconnect the connector that powers the front headlamp. Next, unclip and remove the re…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos