Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the Peugeot RCZ car radio

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Car stereo

In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by yourself. First of all, enter the car and turn it off if it is still on, then locate the four holes on the radio. At this point, insert hooks into the four holes and pull the radio towards you. Once you have done this, disconnect all the electrical cables in the rear area and complete the removal of the factory radio from your Peugeot RCZ.

Posted on 12 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Peugeot RCZ located?
Where is the OBD port of the Peugeot RCZ located?
Peugeot Rcz (2010-2015 / MK 1) To be able to independently locate the OBD port inside your Peugeot RCZ, it only takes a few seconds. All you have to do is carefully read the follow…
How to reset the service indicator on the Peugeot RCZ 2012
How to reset the service indicator on the Peugeot RCZ 2012
Peugeot Rcz (2010-2015 / MK 1) If you own a 2012 Peugeot RCZ and are curious to discover how to correctly and quickly perform a manual reset of the service light, then all you have…
How to disassemble the instrument panel of the Peugeot RCZ
How to disassemble the instrument panel of the Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain how to correctly remove the instrument panel located inside your Peugeot RCZ. First of all, make sure you have a s…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos