Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Peugeot RCZ located?

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Dashboard

To be able to independently locate the OBD port inside your Peugeot RCZ, it only takes a few seconds. All you have to do is carefully read the following guide and follow the steps described. First of all, you need to reach the driver's seat and then shift your attention to the central console of the car, specifically the lower part. At this point, remove the small plastic cover and locate the OBD port you were looking for. Once you have found it, you can use it to connect any diagnostic tool compatible with your Peugeot RCZ.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Access the Fuse Box on a Peugeot RCZ
How to Access the Fuse Box on a Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) The Peugeot RCZ has two fuse boxes. The first fuse box is located inside the cabin, specifically behind the right side cover of the dashboard on the …
How to Replace the Front Headlamp Bulb on a Peugeot RCZ
How to Replace the Front Headlamp Bulb on a Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) To replace the front headlamp bulb on a Peugeot RCZ, open the bonnet to access the components inside the engine bay. Here, you will find the internal…
How to reset the service indicator on the Peugeot RCZ 2012
How to reset the service indicator on the Peugeot RCZ 2012
Peugeot Rcz (2010-2015 / MK 1) If you own a 2012 Peugeot RCZ and are curious to discover how to correctly and quickly perform a manual reset of the service light, then all you have…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos