Do it yourself
| ||||
|
Peugeot Rcz - Video tutorial
Model: Peugeot Rcz
MK 1
- Years 2010-2015 To replace the air filter of the Peugeot RCZ, you need to open the hood so that you can access the components located inside the engine compartment. At the back of the compartment, you will be able to locate the intake pipe, which needs to be disconnected by widening the corresponding fixing rings. This will allow you to open the filter box located in this position, so that the filter inside can be removed. After removal, you can insert the new filter, close the box, and reposition the pipe.
Posted on 12 May 2023 by ScegliAuto
Other guides that may interest you |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |