Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on the Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument cluster

Video tutorial

In this new guide, we will explain how to correctly remove the instrument cluster located inside your Peugeot RCZ. First, ensure you have a small flathead screwdriver or a similar thin object. Now, enter the cabin and reach the driver's seat, then use the flat screwdriver to remove the protective cover located at the top of the steering wheel.

Next, locate the two holes situated below the speedometer and rev counter and unclip the entire cluster from there. Finally, pull the cluster towards you and disconnect the electrical cable.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to disassemble the Peugeot RCZ car radio
How to disassemble the Peugeot RCZ car radio
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by you…
Where to Find the OBD Port on a Peugeot RCZ
Where to Find the OBD Port on a Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) To locate the OBD port in your Peugeot RCZ, it only takes a few seconds. Simply read the following guide carefully and follow the described steps. Fi…
How to Set the Clock on the Peugeot RCZ?
How to Set the Clock on the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) To set the clock on the Peugeot RCZ, turn on the instrument panel by inserting the key into the ignition switch. Once the panel is on, navigate throu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos