Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Door trim panel

How to remove the door panel on a Peugeot 2008? Don’t worry, before starting the disassembly work, disconnect the battery terminals located in the engine bay. Let’s begin disassembly: use a lever to remove the covering plastic of the handle (as shown in the video), then, using a screwdriver, unscrew the retaining screws located there. Once all screws are removed: use the lever to detach all the plastic clips that secure the door. Remove the door panel; disconnect any power connectors and release cable. Carry out the necessary maintenance on the door.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Door Panel on Peugeot 2008
Removing Front Door Panel on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Do you want to remove the door panel on a Peugeot 2008? Let's see how to disassemble the parts to facilitate the removal of the panel. Use a trim too…
How to Remove the Front Door Panel on the Peugeot 2008?
How to Remove the Front Door Panel on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, see how to remove the front door panel on the Peugeot 2008, a very simple and quick operation. First, go inside the cabin, then rem…
How to disassemble the door panel of the Peugeot 2008
How to disassemble the door panel of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Below we will see the instructions that will allow us to disassemble and remove the door panel of the Peugeot 2008. First of all, we open the front d…

Other guides you may be interested in

What Could Cause the Smart Instrument Cluster to Show Three Lines

When the instrument cluster of the Smart shows three lines, it indicates that there are issues with the gearbox and it cannot engage; otherwise, an "N" would appear. To diagnose the problem, you need to obtain an OBDII reader, which can easily be found on any e-commerce platform for a few pounds. The most common cause of failure is damaged wiring from the controller to the gearbox engine connector. These wires may touch the intercooler housing, leading to abrasions, possibly a frayed wire. The video also shows wires touching each other, which can create issues; there may be a damaged sensor, or the problem could be with the gearbox motor. Often, it is the moisture that damages the wiring.

Watch the video!


by ScegliAuto

More videos