Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to disassemble the front door panel in Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Door panel
Operation: How to disassemble the front door panel in Peugeot 2008?

In this tutorial we can see how to remove the front door panel in a Peugeot 2008, a very simple and fast operation. First of all, go inside the passenger compartment, then remove the small panel located in the upper area of the handle and unscrew all the screws indicated. We then disengage the window lifter control console, disconnect the relevant connector and, prying along the entire perimeter, separate the panel from the door. At this point we can disconnect the lock rope and follow the reverse procedure to assemble the spare.


Posted on 11 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos