Do it yourself
| ||||
|
Peugeot 307 - Video tutorial
Model: Peugeot 307
MK 1
- Years 2001-2009 If it happens that the passenger compartment fan does not activate or starts only at maximum speed, then it means that the relative resistance that regulates its speed has been damaged; the resistance is applied to the motor that controls the fan and which is located behind the central console of the dashboard: in order to reach the resistance it is advisable to access from the driver's side and remove the plastic covering present immediately under the steering column and in the front part of the tunnel: the resistance is practically immediately above the accelerator pedal and can be reached by following the relative power supply cable.
Posted on 5 November 2023 by ScegliAuto
Replacing the fan resistor on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's see the replacement of the fan resistor on Peugeot 307. Let's see how to perform the disassembly. With a lever, remove the plastic placed under
How do you replace the blower resistor on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In order to replace the resistance of the passenger compartment fan of the Peugeot 307, it is necessary to unscrew the screws which fix the lateral p
How do you replace the passenger compartment fan on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Replacing the passenger compartment fan on the Peugeot 307 is carried out by removing the rivets that fix the carpet in correspondence with the pedal Other guides that may interest you
|
Frequently Asked QuestionsHow do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |