Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Blower motor

To replace the cabin fan resistor on a Peugeot 307, unscrew the screws that secure the plastic side panel located on the right side of the driver's footwell: once the screws are removed, you can detach the panels to access the components underneath. Here you will find the fan, which can be extracted from its housing by unscrewing the screws and disconnecting the power cables: the resistor is located directly beneath the fan and can now be removed from its housing and replaced with a new one.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fan Resistor on Peugeot 307
Replacing the Fan Resistor on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) We will see the replacement of the fan resistor on a Peugeot 307. Let's see how to perform the disassembly. Remove the plastic cover under the dashbo…
How to Replace the Cabin Fan Resistor on Peugeot 307
How to Replace the Cabin Fan Resistor on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) If the cabin fan does not activate or only runs at maximum speed, it means the resistor that controls its speed is damaged; the resistor is attached …
Removing the Cabin Fan on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Undo the two Torx screws located at the bottom of the passenger door, as shown in the video, and remove the plastic they secured. Now remove all the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos