Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cabin Fan on the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

Video tutorial

In this guide, you will find the main instructions useful for removing and replacing the cabin fan on the Peugeot 307. First, get inside the vehicle and begin removing the plastic panels located at the bottom on the driver's side, above the pedal area; then disconnect the various wiring located in front of the fan, unscrewing the fixing screws to remove it. At this point, carry out the repair or directly replace the cabin fan; then refit the fan and check its operation by following the video tutorial to the end!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on a Peugeot 307
How to Replace the Cabin Fan on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the cabin fan on a Peugeot 307, remove the rivets that secure the carpet at the driver's side footwell and also remove the side panel of t…
How to Replace the Cabin Fan Resistor on a Peugeot 307
How to Replace the Cabin Fan Resistor on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the cabin fan resistor on a Peugeot 307, unscrew the screws that secure the plastic side panel located on the right side of the driver's f…
Removing the Cabin Fan on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Undo the two Torx screws located at the bottom of the passenger door, as shown in the video, and remove the plastic they secured. Now remove all the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos