Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Resistor on Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

Video tutorial

We will see the replacement of the fan resistor on a Peugeot 307. Let's see how to perform the disassembly. Remove the plastic cover under the dashboard using a lever, and unscrew the screws of the glove compartment (where the resistor is located) with a screwdriver.

Once the glove compartment is removed, disconnect the large connector of the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector).

Finally, reassemble the cover and the glove compartment. Check the correct assembly of the previously installed parts and test their correct operation.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Cabin Fan on the Peugeot 307
Guide to Replacing the Cabin Fan on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this guide, you will find the main instructions useful for removing and replacing the cabin fan on the Peugeot 307. First, get inside the vehicle …
How to Replace the Cabin Fan Resistor on Peugeot 307
How to Replace the Cabin Fan Resistor on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) If the cabin fan does not activate or only runs at maximum speed, it means the resistor that controls its speed is damaged; the resistor is attached …
How to Replace the Cabin Fan Resistor on a Peugeot 307
How to Replace the Cabin Fan Resistor on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the cabin fan resistor on a Peugeot 307, unscrew the screws that secure the plastic side panel located on the right side of the driver's f…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos