Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Peugeot 3008 2?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Front bumper

The first thing to do is to remove the front wheel arches of the car shown in the video. By doing this, we will have access to the rear fasteners of the bumper, which can then be unscrewed. After that, we will focus on removing the pins located along the entire lower edge and finally the upper ones. It is very important that after gently pulling the bumper forward to remove it from the bodywork, you remember to disconnect the electrical connectors located at the back, which power the fog lights and any sensors present. In conclusion, with a bit of familiarity, the job can be easily done as a DIY project.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Peugeot 3008 MK2
How to Remove the Front Bumper on a Peugeot 3008 MK2
Peugeot 3008 (2016-2023 / MK 2, P84) In today's video, you will see how to remove the front bumper on a second-generation Peugeot 3008 by following these simple steps. First, unscrew all…
How to Replace the Rear Bumper on a Peugeot 3008
How to Replace the Rear Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the rear bumper on a Peugeot 3008? Follow these steps, which are not too complex if done in order: use a screwdriver or battery-powere…
How to Remove the Front Bumper on a Peugeot 3008
How to Remove the Front Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Hello everyone, today I will explain how to remove the front bumper from your Peugeot 3008. It is not a straightforward task, but with a bit of effor…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos