Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Peugeot 3008 MK2

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Front bumper

In today's video, you will see how to remove the front bumper on a second-generation Peugeot 3008 by following these simple steps. First, unscrew all the fastening screws found in the wheel arches to detach the bumper from the sides and remove the plastic trims; then locate the additional screws underneath the front bumper, as shown in the video. Now unscrew the bolts that connect the wing and bumper, and disconnect the electrical connector found at the rear; finally, unscrew the upper screws with a Torx screwdriver and completely remove the bumper!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of a Peugeot 3008
How to Remove the Front Headlight of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Before starting, open the bonnet of your Peugeot 3008. Begin by removing the front bumper by unscrewing the screws and bolts along the entire perimet…
How to Remove the Front Bumper on a Peugeot 3008
How to Remove the Front Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Hello everyone, today I will explain how to remove the front bumper from your Peugeot 3008. It is not a straightforward task, but with a bit of effor…
How to Remove the Front Bumper on a Peugeot 3008?
How to Remove the Front Bumper on a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) You can remove the front bumper on a Peugeot 3008 by loosening the screws that secure the component to its housing at the front of the car: the screw…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos