Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Front Bumper of the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

A slight abrasion on the bumper can be repaired with sanding and painting. Assess the depth of the scratch: if it is not too deep, you can level it with sandpaper.

Start with 120 grit to remove the damage, then move to 180 grit to prepare the surface. Mask off the black plastic parts to protect them.

Clean the area with a degreaser and apply a high-build primer. After drying (e.g., 20 minutes at 60°C), sand with 400 grit on a block and finish with an orbital sander.

Apply the base coat in light layers, drying with a hairdryer. Finish with a coat of clear lacquer and a light fade on the edges.

After drying, polish the bumper for a uniform result. A patient job that restores the car to a like-new appearance.


Posted on 6 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Peugeot 3008 MK2
How to Remove the Front Bumper on a Peugeot 3008 MK2
Peugeot 3008 (2016-2023 / P84, MK 2) In today's video, you will see how to remove the front bumper on a second-generation Peugeot 3008 by following these simple steps. First, unscrew all…
How to Remove the Front Bumper on a Peugeot 3008
How to Remove the Front Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Hello everyone, today I will explain how to remove the front bumper from your Peugeot 3008. It is not a straightforward task, but with a bit of effor…
How to Remove the Front Headlight of a Peugeot 3008
How to Remove the Front Headlight of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Before starting, open the bonnet of your Peugeot 3008. Begin by removing the front bumper by unscrewing the screws and bolts along the entire perimet…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos