Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Instrument Cluster of the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Instrument cluster

See other generations:
Video tutorial

Learn how to replace the instrument cluster of a Peugeot 3008: with the vehicle off. Locate the cover above the cluster, which is a plastic panel that clips under the instrument cluster; insert a screwdriver at the sides of the cover and pry downwards to release it. At the top of the cluster, there are two upper grooves: push inwards to retract the pins, being careful that the first one does not re-engage while removing the other.

Behind the cluster, you will find two electrical connectors; disconnect them.

Before purchasing a used cluster (many can be found online), check the part number (9808xxxx) and the mileage: the BSI synchronises with the highest value, so if the new cluster has lower mileage, the original values of the car will prevail; if it has higher mileage, it will display the cluster's mileage (and it will be necessary to correct it with dedicated tools like Diagbox).

Connect the connectors to the new cluster, insert it into the housing until you hear the "click" of the locking pins, and reassemble the upper cover.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to remove the radio from the Peugeot 3008
How to remove the radio from the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Removing the steering wheel airbag of the Peugeot 3008 on your own is a simple and quick operation to perform. Before removing the airbag, we must di…
How to Reset the Service Indicator on a Peugeot 3008
How to Reset the Service Indicator on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this video, learn how to reset the oil service maintenance indicator on a Peugeot 3008. This operation is very simple. Enter the vehicle, turn on …

    Frequently Asked Questions

    • 3008 2009-2016 - Start and stop system not working on the Peugeot 3008 what to do? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos