Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Fan Issue on a 2013 Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

In this video, see how to resolve a problem affecting the Peugeot 2008 and many other Peugeot models: the climate control fan not working (and consequently, neither the air conditioning nor the heating). The cause is almost always the electrical connector of the fan motor overheating, which melts the plastic of the connector and pin, interrupting the contact.

The good news is that you do not need to dismantle half the car to reach the fan motor: the connector is located on the passenger side (left-hand drive), under the dashboard you need to look for a wire going to the fan motor, leading to a rectangular connector with two wires (usually one brown and one blue/red); disconnect the connector, which may be melted and therefore break.

If the damage is minor, you can try cleaning the pins with contact spray and a small brush, but if the damage is evident as shown in the video, the solution is to cut off the connector and solder the two wires, ensuring each connection is well insulated with heat-resistant tape.


Posted on 3 April 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Light on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To reset the engine light on the Peugeot 2008, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard just below …
How to fix the problem of the Peugeot 2008 window lifter that has lost its memory
How to fix the problem of the Peugeot 2008 window lifter that has lost its memory
Peugeot 2008 (2013-2019 / MK 1) In this video, we are first shown the problem: the window lifter of the Peugeot 2008 has lost the memorization of the upper and lower stops. In this …
How to Set the Time in the Peugeot 2008?
How to Set the Time in the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) For various reasons, the time displayed on the central display of the Peugeot 2008 may not be updated. This video with verbal commentary will help so…

Other guides you may be interested in

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos