Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 2008 2019-2026

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

Let’s see how to reset the service light on a Peugeot 2008 2019-2026: first, ensure that the engine is off, then press and hold the "ok/menu" button located on the left stalk of the steering wheel, and the start button for ignition. Keep them pressed together for a few seconds, after which the dashboard will light up and a countdown will begin from 10 seconds. You can now release the start button, but continue to hold the "ok" button on the stalk until the countdown reaches zero and the display shows "re-initialisation completed". You can then release the "ok" button and turn off the car.

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Peugeot 2008
How to Reset the Service Light on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To reset the service light on a Peugeot 2008 - after completing the required services from the service schedule - get into the vehicle and close all …
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…
How to Reset the Service Light on Peugeot 2008?
How to Reset the Service Light on Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Here’s a video guide dedicated to cancelling the Service light on the Peugeot 2008. Firstly, note that no electronic diagnostic tools are needed for …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos