Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Refilling the AdBlue Tank on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: AdBlue warning light

Various manufacturers use different strategies for regenerating the particulate filter: the French are always a step ahead and, having developed this technology first, have now replaced cerium with a new additive called AdBlue, which, through a series of chemical reactions, further reduces emissions. This additive is contained within a tank located near the fuel tank, and the filling cap is found in the boot, under the spare wheel well that must be removed from its compartment.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the AdBlue Reservoir Located in the Peugeot 208?
Where is the AdBlue Reservoir Located in the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it…
How do you reset the AdBlue warning light on the Peugeot 208?
How do you reset the AdBlue warning light on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the AdBlue warning light that appears on the instrument panel of the Peugeot 208, you need to top up with the necessary amount of additional…
How to Replace the AdBlue Pump on the Peugeot 208?
How to Replace the AdBlue Pump on the Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To replace the AdBlue pump on the Peugeot 208, lift the car using a ramp so that you can access the components underneath. The pump is located near t…

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer
    • 208 2019-2026 - What to do if the adblue light comes on in the Peugeot 208? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos