Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 206 CC

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

Let's see how to reset the service light on a Peugeot 206: Turn off the ignition (remove the key or press the Stop button if it is a keyless version). Look for the reset button for the trip odometer (usually a small black or grey button located to the left of the speedometer or on the dashboard, often labelled "TRIP" or "000"). Press and hold that button with one finger. While continuing to hold the button, turn the key to ON (or press the Start/Stop button once without the brake). Do not start the engine yet. After about 10-15 seconds, the display will show the number "0" or a counter that starts to count down. When the counter reaches zero, release the button. Start the engine and check: the service light should be off.

Posted on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2002 Peugeot 206.
How to reset the service light on a 2002 Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) When we need to reset the service light related to the maintenance, we must turn on the instrument panel of the Peugeot 206 and press the button loca…
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This brief guide explains how to reset the service light for routine maintenance on a Peugeot 206. First, get into the vehicle and press and hold the…
How to reset the service light on the Peugeot 206
How to reset the service light on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The service light on the Peugeot 206 activates when we need to perform necessary maintenance, such as a service, immediately after it is necessary to…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos