Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Display Vibration Issue on Peugeot 3008/5008

Model: Peugeot 3008 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Onboard computer

See other generations:
Video tutorial

Many owners of Peugeot 3008 and 5008 notice vibrations coming from the display area after the first 40,000 to 50,000 miles, especially when going over bumps or potholes. The noise sounds like wiring rattling inside, but in reality, it is the display itself vibrating in its housing.

The solution is to remove the trim located under the air vents, which is secured only by clips: pull it towards you with your hands, without using levers or tools; the trim will detach easily with gentle pulling. Once the trim is removed, you will find four screws securing the display.

Remove them and access the power connector. The vibrations come from the display's support clips.

The recommended fix is to apply a self-adhesive gasket (felt tape, adhesive foam, or silicone) between the display and the contact point with the bodywork. This way, the material absorbs vibrations and prevents direct contact with rigid surfaces.

Reassemble everything, and you're done.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Reduce the Brightness of the Multimedia Screen on a Peugeot 3008/5008
How to Reduce the Brightness of the Multimedia Screen on a Peugeot 3008/5008
Peugeot 3008 (2016-2023 / P84, MK 2) In this video, we see how to reduce the brightness of the multimedia screen on the Peugeot 3008/5008. In certain lighting conditions, the excessive b…
How to Repair the External Rear-View Mirror of a Peugeot 3008
How to Repair the External Rear-View Mirror of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this video, we will see how to solve a rather common problem with this version of the Peugeot 3008: the mirror opened too far, exceeding the stop …

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos