Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

In this video tutorial, you will learn how to remove the rear door panel of a Peugeot 206. First, open the door and remove the hex screw located inside the glove compartment handle. Then, use a flat screwdriver to pry off the trim around the handle and pull the window winder handle to detach it. Next, detach the door panel by prying it off the sides, preferably using plastic levers to avoid damaging the panel. Carefully unclip and remove it!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …
Removing Front Door Panel on Peugeot 206
Removing Front Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel if it is not repairable on a Peugeot 206. Remove the driver's left panel. Take off the frame of the door opening lever and det…
How to Remove the Door Panel of a Peugeot 206
How to Remove the Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos