Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Wishbone on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Control arm

In this video, you will learn how to remove the wishbone from a Peugeot 206. First, remove the wheel and lift the car: then, unscrew the central hub nut with a socket wrench and by unscrewing the rear bolt of the wishbone, detach it from the driveshaft. Next, unscrew the upper bolt securing the wishbone to remove it: use a tool for leverage if necessary. Clean and lubricate the mechanical parts and then fit the new wishbone, securing it first at the top and then at the driveshaft. Refit the hub and the wheel!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Lift the vehicle and place it on suitable axle stands; remove the front wheel and locate the mounting pins of the wishbone to the chassis and hub; de…
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
Peugeot 206 (1998-2012 / MK 1) Before you start, open the boot of your Peugeot 206. First, unclip and remove the clip securing the internal side cover of the boot, allowing access …

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos