Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Knob on 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shift knob

Video tutorial

Remove the gear knob from the gear lever. This is an easy operation, follow these steps.

Disconnect the gaiter frame from the plastic trim on the centre tunnel, lift it up, and cut the plastic tie with side cutters (note the type of knob fitted). Remove the knob to separate it from the leather gaiter.

Fit the gaiter to the knob and then the assembly onto the gear stick, securing the gaiter to the plastic frame until it clicks into place on the centre tunnel. Test the correct operation of the gearbox with the new knob and check the fitting of all the plastics on the centre tunnel.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob of the Peugeot 207
Replacing the Gear Knob of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In a few simple steps, follow the procedure to remove and replace the gear knob of the Peugeot 207. First, get inside the vehicle and start by detach…
How to Remove the Gear Knob of the Peugeot 207
How to Remove the Gear Knob of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The following steps will guide you through the process of removing and replacing the gear knob of the Peugeot 207. First, get inside the cabin and st…
How to Replace the Gear Knob on a Peugeot 207
How to Replace the Gear Knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 207. Start by unhooking and lifting the lower section of the gear lever gaiter. Then, gras…

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos