Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Reset the Battery Warning Light on a Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Warning light – error code

In today's video, we will see the instructions that will allow us to reset the battery warning light on a Peugeot 508, as well as on other PSA group models. First, get inside the vehicle and turn on the ignition; then open the driver's side front window and subsequently turn off the ignition before opening the bonnet. At this point, disconnect the negative terminal of the battery and then reconnect it; then turn on the light switch and press the start button, holding down the vehicle's remote lock button for about ten seconds. Just follow the video to the end and check the result!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of the remote control for the Peugeot 508.
How to change the battery of the remote control for the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) In the following guide, you will find the description of the procedure you need to follow to safely replace the battery inside the remote control of …
How to Reset the AdBlue Warning Light on the Peugeot 508
How to Reset the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…
How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To correctly reset the service light of your second series Peugeot 508, simply follow the procedure described. The entire operation requires very lit…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos