Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air filter

Video tutorial

Open the bonnet and use the support rod. Remove the rubber cover above the air duct, then loosen the clamp by unscrewing the screw. Disconnect the air duct from the filter housing.

Remove the brake fluid reservoir by unscrewing the two T20 Torx screws that secure it. At this point, you will be able to remove the filter housing. To open it, unscrew the four screws and remove the cover.

Extract the air filter by simply pulling it out by hand and insert the new one, ensuring it is properly positioned. Proceed in reverse for reassembly.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Peugeot 307
How to Replace the Air Filter on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before starting, open the front bonnet of your Peugeot 307. Begin by disconnecting the air filter hoses by loosening the metal clips. Next, unscrew a…
Replacing the Air Filter of the Peugeot 307 2.0 HDi
Replacing the Air Filter of the Peugeot 307 2.0 HDi
Peugeot 307 (2001-2009 / MK 1) The instructions in this guide will illustrate how to remove and replace the engine air filter of the Peugeot 307 2.0 HDi. First, open the vehicle's …
Replacing the Air Filter on the Peugeot 307 1.6 HDI
Replacing the Air Filter on the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) This guide outlines the steps to remove and replace the engine air filter on the Peugeot 307 1.6 HDI. First, open the bonnet by pulling the lever ins…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos