Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlight Bulb Replacement on Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

Video tutorial

Lift the bonnet and insert the support rod. Replacing the front indicator bulb is very simple, as it is easily accessible from above once the bonnet is raised. Just disconnect the visible connector and unscrew the bulb holder, which will then come out of its seat.

Remove the bulb from its holder, insert the new one, and reconnect the connector. To replace the dipped beam bulb, you need to reach behind the headlight and again remove the holder from its seat.

Then, in the usual way, you can replace the bulb. Nothing could be easier!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Removing Front Headlight Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the front headlight bulbs on a Peugeot 206? Let's look at removing the bulbs and parts of the front headlight. Open the bonnet by …
How to Change the Headlight Bulbs on a Peugeot 206 Plus
How to Change the Headlight Bulbs on a Peugeot 206 Plus
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs fitted on a Peugeot 206. If they are damaged, replace them. Open the access panel, pull the bonnet release lever;…
Replacing the Rear Light Bulbs of the Peugeot 206
Replacing the Rear Light Bulbs of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) These brief and simple steps will allow you to remove and replace the rear light bulbs of the Peugeot 206. First, open the boot and start removing al…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos