Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light on Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part:

Video tutorial

Open the boot lid and remove the two 10 mm nuts securing the third brake light. Once done, grasp the light from the outside and pull it out of the bodywork.

Disconnect the connector by pressing the appropriate tab and also detach the black side cable. Now that you have the light free, place it on a workbench and disassemble it: press towards the centre on the two black tabs at the back, as shown in the video, and pull out the bulb holder from the casing.

Replace the burnt-out bulbs and reassemble everything in reverse order. Good luck!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on a Peugeot 307
How to Replace the Third Brake Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before starting, open the rear hatch of the boot on your Peugeot 307. Begin by unclipping and removing the internal cover near the third brake light.…
Dismantling the Third Brake Light on a Peugeot 307
Dismantling the Third Brake Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's video, you will learn how to dismantle the third brake light on a Peugeot 307, in simple steps. First, open the boot lid and use a 10 mm s…
How to Remove the Third Brake Light on Peugeot 307
How to Remove the Third Brake Light on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Damage to the bulbs of the third brake light is a common issue. To replace these bulbs, you first need to remove the third brake light. Open the rear…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos