Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on the Peugeot Bipper Tepee

Model: Peugeot Bipper Tepee MK 1 - Years 2007-2016
Part: Checks and maintenance

To replace the window switch on the Peugeot Bipper, you will need a flathead screwdriver. Use it to gently pry out the switch, as shown in the video. Once extracted from its housing, disconnect the plug. Take the new switch and connect the plug to it. After the new switch is connected, insert it into the housing where the old switch was located. Finally, check that the new switch operates correctly.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Location of Fuses in the Peugeot Bipper Tepee
Peugeot Bipper Tepee (2007-2016 / MK 1) In this brief and simple guide, we will look at the diagram and positioning of the fuse boxes in the Peugeot Bipper Tepee, following the instructions…
How to Install the Car Radio in the Peugeot Bipper Tepee - Citroen Nemo
How to Install the Car Radio in the Peugeot Bipper Tepee - Citroen Nemo
Peugeot Bipper Tepee (2007-2016 / MK 1) In this video tutorial, you will learn how to install the car radio in the Peugeot Bipper Tepee, as well as in the Citroen Nemo and Fiat Fiorino. Fir…
How to Access the Fuses in a Peugeot Bipper Tepee
How to Access the Fuses in a Peugeot Bipper Tepee
Peugeot Bipper Tepee (2007-2016 / MK 1) In today's video tutorial, see how to access the fuses in the Peugeot Bipper Tepee, following these simple and quick steps. First, get in the vehicle…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos